Quote from: The Lord Ruler on May 19, 2017, 11:33:52 AMQuote from: challengerX on May 19, 2017, 11:26:58 AMQuote from: Deci on May 19, 2017, 11:06:52 AMQuote from: CIS on May 19, 2017, 10:44:46 AMQuote from: Deci on May 19, 2017, 09:42:21 AMQuote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.Congrats on getting stable, full-time work. That sounds like a good gig right there.Thanks. It is.You're welcome.I wasn't talking to you.How's that fake dick of yours? Bet you wish you had a real one huh?
Quote from: challengerX on May 19, 2017, 11:26:58 AMQuote from: Deci on May 19, 2017, 11:06:52 AMQuote from: CIS on May 19, 2017, 10:44:46 AMQuote from: Deci on May 19, 2017, 09:42:21 AMQuote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.Congrats on getting stable, full-time work. That sounds like a good gig right there.Thanks. It is.You're welcome.I wasn't talking to you.
Quote from: Deci on May 19, 2017, 11:06:52 AMQuote from: CIS on May 19, 2017, 10:44:46 AMQuote from: Deci on May 19, 2017, 09:42:21 AMQuote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.Congrats on getting stable, full-time work. That sounds like a good gig right there.Thanks. It is.You're welcome.
Quote from: CIS on May 19, 2017, 10:44:46 AMQuote from: Deci on May 19, 2017, 09:42:21 AMQuote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.Congrats on getting stable, full-time work. That sounds like a good gig right there.Thanks. It is.
Quote from: Deci on May 19, 2017, 09:42:21 AMQuote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.Congrats on getting stable, full-time work. That sounds like a good gig right there.
Quote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.
Quote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?
Quote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.
Quote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not white
I don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.
Quote from: challengerX on May 19, 2017, 11:38:59 AMQuote from: The Lord Ruler on May 19, 2017, 11:33:52 AMQuote from: challengerX on May 19, 2017, 11:26:58 AMQuote from: Deci on May 19, 2017, 11:06:52 AMQuote from: CIS on May 19, 2017, 10:44:46 AMQuote from: Deci on May 19, 2017, 09:42:21 AMQuote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.Congrats on getting stable, full-time work. That sounds like a good gig right there.Thanks. It is.You're welcome.I wasn't talking to you.How's that fake dick of yours? Bet you wish you had a real one huh?You wouldn't stand a chance in real life, I would be savage Ruler to you and defend myself by burning you back with proper wordplay. That shit oddly enough just doesn't translate on the internet.
Quote from: The Lord Ruler on May 19, 2017, 11:41:14 AMQuote from: challengerX on May 19, 2017, 11:38:59 AMQuote from: The Lord Ruler on May 19, 2017, 11:33:52 AMQuote from: challengerX on May 19, 2017, 11:26:58 AMQuote from: Deci on May 19, 2017, 11:06:52 AMQuote from: CIS on May 19, 2017, 10:44:46 AMQuote from: Deci on May 19, 2017, 09:42:21 AMQuote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.Congrats on getting stable, full-time work. That sounds like a good gig right there.Thanks. It is.You're welcome.I wasn't talking to you.How's that fake dick of yours? Bet you wish you had a real one huh?You wouldn't stand a chance in real life, I would be savage Ruler to you and defend myself by burning you back with proper wordplay. That shit oddly enough just doesn't translate on the internet.You're obsession is pathetic.
Quote from: Zonda on May 18, 2017, 11:47:29 PMwhite people the type of business owners to take home $10k a day while jumping through every loophole possible to justify giving their 50 hour week workers a yearly paycheck of $25kThis is also a good point, cuz I'm basically Nigger Jim out scraping, priming, and painting 20ft tall lamp posts in the sun wearing my antifa/watchdogs-makeshift burka just so I don't fry out in the sun, all the while making minimum wage. Plus the school wants to charge $50 extra a month just for air conditioning because they know how disgusting the heat gets here. White people smh I doubt they're even real whites
white people the type of business owners to take home $10k a day while jumping through every loophole possible to justify giving their 50 hour week workers a yearly paycheck of $25k
lol its the opposite where i workmexis are always cutting corners and goofing off when the boss isnt around
Quote from: nͫiͤcͫeͤ on May 19, 2017, 04:49:30 AMlol its the opposite where i workmexis are always cutting corners and goofing off when the boss isnt aroundAre they chicanos or from Mexico? From what I've experienced, Mexican-Mexicans (if they're not cartel members) work their butts off while Mexican-Americans are lazy assholes.
Quote from: Deci on May 19, 2017, 09:42:21 AMQuote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.What company?
Quote from: Deci on May 19, 2017, 09:42:21 AMQuote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.what made you type all that out instead of just saying "im a machinist that makes parts for airplanes"
Quote from: DAS B00T x2 on May 19, 2017, 07:21:06 PMQuote from: Deci on May 19, 2017, 09:42:21 AMQuote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.What company?A manufacturing company. Do you honestly believe I'm going to give the name out? Hell fucking no.
Quote from: Deci on May 19, 2017, 07:52:52 PMQuote from: DAS B00T x2 on May 19, 2017, 07:21:06 PMQuote from: Deci on May 19, 2017, 09:42:21 AMQuote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.What company?A manufacturing company. Do you honestly believe I'm going to give the name out? Hell fucking no.I need to know so that when we have parts break I know to blame you or not.
Quote from: DAS B00T x2 on May 19, 2017, 09:02:02 PMQuote from: Deci on May 19, 2017, 07:52:52 PMQuote from: DAS B00T x2 on May 19, 2017, 07:21:06 PMQuote from: Deci on May 19, 2017, 09:42:21 AMQuote from: challengerX on May 19, 2017, 09:26:04 AMQuote from: Deci on May 19, 2017, 09:24:57 AMQuote from: challengerX on May 19, 2017, 09:21:43 AMQuote from: Deci on May 19, 2017, 09:09:20 AMI don't know about you but I work really fucking hard at my job. I do my absolute best everyday at work.You're not whiteAnd there you go, hence I work fucking hard.What do you do?Currently I'm a machinist. I help create aircraft parts using a caliper and micrometer and a CNC machine, this last week I was even using a sand disk to square ends of parts, which requires a respirator mask and goggles, its tough shit but I was able to do it. I'm about to have a position change starting next week. No more 3 day weekends and I'll be getting more experience in measuring and blue print reading this time around. Of course I'll be trying this out and if I'm not happy with the results within the first week, I can still remain a machinist, but I think I'm going to prefer QC much more. 10 hours a day of machining and squaring ends is really exhausting, as well as dangerous. Safety is very important at my workplace.Pay will still be the same. I'm not gonna get a raise until a year later if anything, the boss likes having me around.What company?A manufacturing company. Do you honestly believe I'm going to give the name out? Hell fucking no.I need to know so that when we have parts break I know to blame you or not.The last thing I need is for you to prank call the business I work for.Not happening.
Working in manual labour has made me so racist.
